Fsr HD-H70-SP User Manual

HD-H70-SP HDBaseT HDMI EXTENDER SET BASED ON V1.0.0 244 Bergen Boulevard, Woodland Park, NJ 07424  Tel 973-785-4347  FAX 973-785-

10 HD-H70-SP-Rx Rear Panel ID Name Description 1 Power Connect to a power supply via a power adapter to either the transmitter or receiver side 18

11 ID Name Description  RS-232 pass through capability enabled  Firmware cannot be updated. Update:  RS-232 pass through capability disabled 

12 IR IN IR OUT Tx Rx HDMI OUTNORMA LUPD ATE+-IR IN IR OUT Tx Rx HDMI INNORMA LUPD ATE+-HD-H70-SP-RxHD-H70-SP-TxETHERNETBLU-RAYDVDTVIR RECEIVERCABLEI

13 IR and RS-232 Operation IR Control The IR pass-through function in the Transmitter and Receiver allows you to control the source fr

14 Scenario 2 In this case, IR OUT on the Transmitter is connected to an IR emitter cable and IR IN on the receiver is connected to an IR receiver cab

15 RS-232 Control and Firmware Updates The RS-232 port on the Transmitter or Receiver can be connected to a computer to update firmware. An RS-232 dev

16 This page is intentionally blank

17 Troubleshooting Why is the power LED off?  Check that the power supply is powered on.  Check that all the cables are properly connected. Why is

18 Why does the Display connected to the Receiver display snow or mosaic?  Check that all the cables are qualified and connected properly.  Check

19 Specifications HD-H70-SP-Tx Technical Input 1 x HDMI IN Input Signal Type HDMI 1.4 with 4K2K Input Resolution Support 4k 2160p (3840x2160) / 1

2 Important Safety Instructions Contents are subject to change without notice Warnings To reduce the risk of fire, electric shock or product damag

20 Cable Specifications For best resolution and ESD performance Shielded CAT6A in a TIA / EIA 568B wiring configuration is recommended. Cable Type R

21 HD-H70-SP-Rx Technical Input 1 x HDBT IN Input Signal Type HDBT Input Resolution Support 4k 2160p (3840x2160) / 1080P / 1080i / 720P / 576P /

22 Cable Specifications For best resolution and ESD performance Shielded CAT6A in a TIA / EIA 568B wiring configuration is recommended. Cable Type Ra

23 Limited Warranty The HD-H70-SP HDBaseT HDMI EXTENDER SET is warranted against failures due to defective parts or faulty workmanship for

3 Table of Contents Overview ... 4 Features ...

4 Overview HD-H70-SP HDBaseT HDMI EXTENDER SET is designed to extend HDMI signals up to 70 meters via a single CAT5e / CAT6 / CAT6A / CAT 7 cable. The

5 Features FSR HDBaseT 70 Meter HD-H70-SP Ultra Slim Pack Transmitter & Receiver Set:  70 Meter units are Class B HDBaseT Units known as HDBaseT

6 HD-H70-SP-Tx Front Panel ID Name Description 1 Power LED On: Unit is powered on. Off: Unit is powered off. 2 Status LED Blinking: Normal operat

7 HD-H70-SP-Tx Rear Panel ID Name Description 1 Power Connect to a power supply via a power adapter to either the transmitter or receiver side 18

8 ID Name Description Mode  RS-232 pass through capability enabled  Firmware cannot be updated. Update:  RS-232 pass through capability disab

9 HD-H70-SP-Rx Front Panel ID Name Description 1 Power LED On: Receiver is powered on. Off: Receiver is powered off. 2 Status LED Blinking: Norma